TMS zl Management and Configuration Guide ST.1.1.100226

9-8
Routing
Static Routing
To view your current static routes, click Network > Routing > Static Routes.
Figure 9-2. Network > Routing > Static Routes Window
When you use static routing in exclusion of other routing protocols, the router
will not share its routing table with other routers. This means that the hosts
serviced by this router will only be able to reach a destination if you add an
entry for that destination.
To add a static route to your network, complete the following steps:
1. Access the Network > Routing > Static Routes window.
2. Click Add Static Route. The Add Static Route window is displayed.
Figure 9-3. Add Static Route Window
3. For Destination Type, select the destination type: Network or Host.