TMS zl Management and Configuration Guide ST.1.1.100226

9-49
Routing
OSPF
11. In the Position field, specify the priority of this access policy. Be sure that
you set the position of this policy above the position of the policy that
allows all Zone1-to-Internal zone OSPF traffic.
12. Click Apply. Then you can optionally click the Advanced tab to further
narrow the policy. For more information about the Advanced tab, see
“Create Firewall Access Policies” in Chapter 4: “Firewall.”
13. Click Close.
Example OSPF Setup
Figure 9-17 shows an example OSPF router setup using TMS zl Modules.
Figure 9-17. Example OSPF Setup with TMS zl Modules