TMS zl Management and Configuration Guide ST.1.1.100226

9-54
Routing
Viewing Unicast Routes
Figure 9-19. Network > Routing > View Routes Window
The columns are as follows:
■ Destination Address — The route's destination, either a host or a
network; the default gateway shows 0.0.0.0/0.
■ Gateway Address — The address of the gateway for that destination
■ Metric — The route’s metric; the default gateway is always 0.
■ Interface — The route’s VLAN or GRE tunnel. There are also some
special interfaces:
• eth2 — HA High Availability VLAN
• irstint — IKE mode config addresses
• ppp — L2TP over IPsec VPN
■ Type — Static, connected, OSPF, or RIP