TMS zl Management and Configuration Guide ST.1.1.100226

10-9
Troubleshooting
Basic Troubleshooting Tools
Figure 10-3. Output for the show system-information Command
Table 10-3 lists some useful show commands for the TMS zl Module when it is
operating in routing mode. (For a complete list of
show commands, see Appen-
dix A, “Command-Line Reference.”)
Table 10-3. show Commands for the TMS zl Module in Routing Mode Only
Command Syntax Description
show access-policy show access-policy [group <group
name> | multicast] [filter <source zone>
<destination zone>
Displays the firewall access policies currently
configured on the module. When options are
included, it displays policies by:
• Type of policy (multicast or unicast)
• User group
• Source zone
• Destination zone
show alg show alg Displays the module’s application level gateways
(ALGs) and whether they are enabled or disabled.
show connection-settings show connection-settings < limit |
timeout [default] | reservation >
Displays the connection restriction settings:
• Connection limits for each zone
• Service and default connection timeouts
• Connection reservations for zones
show ip show ip Displays all the TMS VLANs and the IP address
that are assigned to them.