TMS zl Management and Configuration Guide ST.1.1.100226

10-113
Troubleshooting
Troubleshooting the TMS zl Module in Monitor Mode
want to disable that signature. The first option is generally preferred so that
the TMS zl Module can continue to protect your network from the attack that
is detected by that particular signature.
To disable a signature, complete the following steps:
1. Click Intrusion Detection > Signatures.
2. Click View.
Figure 10-26.Intrusion Detection > Signatures > View Window
3. Locate the signature in the list and clear the Enable option.
4. Click Save.
You can also disable a signature from the CLI. Enter:
hostswitch(tms-module-C:config)# ips signatures
<Signature_Family> <Signature_ID> disable