TMS zl Management and Configuration Guide ST.1.1.100226

A-32

Command-Line Reference

Product OS Manager Context Commands

Table A-5. traceroute Extended Options

For example, to trace the route to 10.1.1.1, set the timeout to 30 seconds, and

specify 10 as the maximum number of hops, enter the following command:

ProCurve(tms-module-<slot ID>)# traceroute 10.1.1.1

timeout 30 maxttl 10

Product OS Manager Context

Commands

The Product OS manager context is used to configure the firewall, IDS or IPS,

VPN, and other features provided by the TMS zl Module. To access the Product

OS manager context, first access the manager context of the CLI of the switch

in which the TMS zl Module resides as a manager:

You can also access the manager context of the Product OS in two other ways:

■ By accessing the Products OS operator context and then entering the

enable command

■ By accessing the TMS zl Module through SSH and logging in as a manage-

ment user with manager rights

Extended Command Option Purpose Default Settings

minttl <number of hops> Specifies the minimum number of hops to the

final destination (1–255)

maxttl <number of hops> Specifies the maximum number of hops to the

final destination (1–255)

timeout <number of seconds> Sets the timeout limit for a packet that does not

reach the final destination (1–120)

probes <number of queries> Sets the number of queries that are sent (1–5) 3

Syntax: services <slot ID> < <product index> | name <product name> >

Moves you to an OS context on the module.

Replace <slot ID> with the letter for the chassis slot in which

the module is installed.

Replace <product index> with the product index assigned tot he

TMS zl Module. See

Replace <product name> with services-module. The Services OS

context is always assigned product name services-module.