TMS zl Management and Configuration Guide ST.1.1.100226

A-35
Command-Line Reference
Product OS Manager Context Commands
Figure A-9. Product OS Context
The following sections describe commands that are available from the man-
ager context of the Product OS.
batch
This command enables and disables batch, or scripting, mode.
Syntax: [no] batch
This command is also available from the global configuration context.
boot
This command exits the current session and reboots the module. You will be
asked to confirm that you want to reboot the module.
Syntax: boot
This command is also available from the global configuration context.
capture
This command shows the current packets on a specified network. This
command is useful for troubleshooting connection problems and monitoring
network activity because it allows you to see all of the packets that are moving
across particular network interfaces. You can view the output to the terminal,
or you can save the output in a pcap file.
Syntax: capture < file | terminal > [vlan <id> | gre <tunnel name> | ha | any] <extended
options>
If you want to capture packets on a VLAN, include the vlan option and specify
an ID.