TMS zl Management and Configuration Guide ST.1.1.100226

A-38
Command-Line Reference
Product OS Manager Context Commands
To upload a configuration file from an external TFTP, FTP, or SCP server to
the module’s startup-config, enter one of the following commands:
Syntax: copy tftp < startup-config | image > <source server location> <source
filename>
Syntax: copy < ftp | scp > < startup-config | image > <source server location> <source
filename> user <username>
Replace <source server location> with the IP address of your TFTP or SCP
server.
Replace <source filename> with the name of the file you are uploading from
your server.
Replace <username> with the username on the account on your FTP or SCP
server.
For example, to copy a new TMS zl Module software image to the device, enter
the following command:
ProCurve(tms-module-<slot ID>)# copy tftp image 10.1.10.4
ST.1.1.100226
These commands are also available in the global configuration context.
end
To return to the manager context, enter end. The end command moves you
back to the manager context, regardless of the context from which you enter
the command.
Syntax: end
This command is available from all contexts.
erase
This command exits the current session and reboots the router with the
factory default startup-configuration. The TMS zl Module CLI notifies you that
the startup configuration will be restored to the factory default and the module
will be rebooted; then it asks if you want to continue.
Syntax: erase startup-config