TMS zl Management and Configuration Guide ST.1.1.100226

A-85
Command-Line Reference
Global Configuration Context
Syntax: no l2tp radius-auth
To clear the IP settings that you have configured for a domain, enter the
following command:
Syntax: no l2tp radius-auth domain-config <domain name>
Replace <domain name> with the name of the domain for which you want
to clear the settings.
Example L2TP RADUS Authentication. This section includes all of the
commands necessary to configure the TMS zl Module to authenticate L2TP
clients to the RADIUS server with the parameters detailed in Table A-24.
Table A-24. Example L2TP RADIUS Authentication
ProCurve(tms-module-<slot ID>:config)# radius-server
host 192.168.12.36 secret procurve nas-id tms-module
ProCurve(tms-module-<slot ID>:config)# l2tp radius-auth
10.2.2.1
ProCurve(tms-module-<slot ID>:config)# l2tp radius-auth
domain-config global ip-pool 10.2.2.2 10.2.2.254 dns
primary 192.168.12.200
Parameter TMS zl Module Setting
RADIUS Server
RADIUS server IP address 192.168.12.36
Secret key procurve
NAS ID tms-module
Domain name —
L2TP Server
Server IP address 10.2.2.1
Global domain IP settings
Start IP address 10.2.2.2
End IP address 10.2.2.224
Primary DNS server 192.168.12.200
Secondary DNS server —
Primary WINS server —
Secondary WINS server —