TMS zl Management and Configuration Guide ST.1.1.100226

A-92
Command-Line Reference
Global Configuration Context
management zone. To add a zone to the set of management zones, type the
following command:
Syntax: management zone <zone>
Replace <zone> with the zone from which you want to manage the module.
The available zones are:
■ internal
■ external
■ dmz
■ zone1
■ zone2
■ zone3
■ zone4
■ zone5
■ zone6
■ <user-named zone>
Monitor Mode
In monitor mode, this command configures your dedicated management
interface VLAN and IP address.
management ip. To configure your management interface IP address, enter
the following command:
Syntax: management ip <IP address> <mask>
Replace <IP address> <mask> with the IP address and subnet mask you want
to assign to the module.
For example, to assign the module IP address 10.10.15.72/24, enter the follow-
ing command:
ProCurve Switch 5406zl(tms-module-<slot ID>:config)#
management ip 10.10.15.72 255.255.255.0
management vlan. To configure your management VLAN, enter the follow-
ing command:
Syntax: management vlan <VLAN ID>