TMS zl Management and Configuration Guide ST.1.1.100226

A-98
Command-Line Reference
Global Configuration Context
To set the operating mode, enter the following command:
Syntax: operating-mode < monitor | routing >
Changing the operating mode will cause the module to reboot. You will be
prompted to confirm the change.
page
This command enables and disables page mode. In page mode, the terminal
output will pause when it fills the screen and wait for a keystroke such as
space
or Ctrl+C.
Syntax: [no] page
password
This command changes the manager and operator passwords. To change a
password, enter the following:
Syntax: password [manager | operator]
After entering this command, you will be prompted to enter the new password,
and then confirm it. The new password cannot have more than 14 characters.
For example, to change the manager password to $tms*manager33, you would
enter:
ProCurve(tms-module-<slot ID>:config)# password manager
New password for manager: $tms*manager33
Please retype new password for manager: $tms*manager33
ping
This command sends an ICMP echo to a specified destination.
Syntax: ping < IP address | hostname >
Replace <IP address> with the IP address of the ping destination.
Replace <hostname> with the hostname of the ping destination.
The module displays the number of pings sent and responses received.