TMS zl Management and Configuration Guide ST.1.1.100226

A-99
Command-Line Reference
Global Configuration Context
For example:
ProCurve(tms-module-<slot ID>)# ping 10.1.1.1
When you send ICMP echoes, the module displays the ping statistics to
describe the types of responses the router receives. For example, Figure A-12
shows a successful ping:
Figure A-12. Sending a Ping
If you need to halt a ping operation, press
Ctrl+Z.
This command is also available from the Product OS manager context.
Note If you cannot ping a device, check that you have configured an access policy
to allow ICMP/Echo traffic from the Self zone to the zone you are trying to ping.
port-map
This command allows you to configure port maps so that your firewall and
IPS/IDS know which type of traffic is expected on which ports.
To configure (or delete) a port map, enter the following command:
Syntax: [no] port-map <service> < tcp | udp > <port>
Replace <services> with the name of the service for which you are creating
the map.
Replace <port> with the port to which the firewall and IDS/IPS will expect the
service.
Available services are listed in Table A-29.