TMS zl Management and Configuration Guide ST.1.1.100226

A-101

Command-Line Reference

Global Configuration Context

Replace <policy name> with the name assigned to the policy.

To add or remove ports to an existing policy, type the following command:

Syntax: port-trigger <policy name> < add | remove > < inbound | outbound >

< tcp | udp > < port |[range <start port> <end port> >

Replace <policy name> with the name of the policy that you are editing.

Table A-30. Services Available

aol bgp biff bootpc

bootps chargen citrix-ica cmd

ctiqbe daytime discard-tcp discard-udp

dns-tcp dns-udp dnsix echo-tcp

echo-udp exec finger ftp

ftp-data gopher h323 hostname

http https ident imap4

ipsec-nat-t-tcp ipsec-nat-t-udp irc isakmp

kerberos-tcp kerberos-udp klogin kshell

l2tp-tcp l2tp-udp ldap ldaps

nameserver netbios-dgm netbios-ns netbios-ssn

nntp ntp pcanywhere-data pcanywhere-

status

pim-auto-rp-tcp pim-auto-rp-udp pop2 pop3

pptp radius radius-acct rip

securied-udp smtp snmp snmptrap

sqlnet ssh syslog tacacs-tcp

tacacs-udp talk-tcp talk-udp telnet

tftp time uucp who

whois xdmcp

user-configured service objects