TMS zl Management and Configuration Guide ST.1.1.100226

A-121
Command-Line Reference
IKEv1 Context
For example:
ProCurve(tms-module-<slot ID>:ikev1)# identities local
type ip-addr 172.16.2.1 remote type email-addr
[e-mail]
preview
Before you apply the IKEv1 policy, you should preview it to make sure that
everything is correct. The preview displays the settings that you have config-
ured even if they have not yet been applied. To preview your policy, enter the
following command:
Syntax: preview
For example:
ProCurve(tms-module-<slot ID>:ikev1)# preview
Preview IKEv1 policy
---------------------------------------------
*Policy Name: ikepol
*Policy Type: Client-to-Site
*Local Gateway: 10.10.50.54
*Local ID
Type: IP Address
Value: 10.10.50.54
*Remote ID
Type: Domain Name
Value: gateway.procurve.com
*IKE Authentication
Key Exchange Mode: Main Mode
Authentication Method: DSA Signature
Security Parameters Proposal
Diffie-Hellman (DH) Group: Group 1 (768)
Encryption Algorithm: 3DES
Authentication Algorithm: MD5
SA Lifetime in Seconds: 28800
XAUTH Configuration
XAUTH: disabled