TMS zl Management and Configuration Guide ST.1.1.100226

A-138
Command-Line Reference
IPsec Policy Context
For example:
ProCurve(tms-module-<slot ID>:ipsec:<action>)# traffic-
selector protocol tcp local any port any remote host
10.2.3.3 port 89
This command is also available from the IPsec policy, IPsec policy bypass, and
IPsec policy deny contexts.
IPsec Auto Keys Context
This context includes the commands specific for configuring an IPsec policy
that uses IKE. (It is available only when the TMS zl Module is in routing mode.)
Figure A-17. IPsec Auto Keys Context
address •any
•host <IP address>
• network address/prefix length
• ip-range <start IP address> <end IP address>
• address <address object>
*If you use TCP or UDP for the traffic selector, you must enter port and specify a port
after both the local address and the remote address.
**If you select echo or timestamp, the tunnel must use manual keying instead of IKE
in your IPsec policy.
Parameter Options