TMS zl Management and Configuration Guide ST.1.1.100226

A-141
Command-Line Reference
IPsec Policy Context
ProCurve(tms-module-<slot ID>:ipsec:apply:auto)# sa-
lifetime seconds 28800 kilobytes 500000
IPsec Manual Keys Context
This context includes the commands specific for configuring an IPsec policy
that uses manual keying. (It is available only when the TMS zl Module is in
routing mode.)
Figure A-18. IPsec Manual Keys Context
The IPsec Manual Keys context includes the commands that are specific to
configuring an IPsec policy that uses manual keying. Before you can enter this
context, you must set the IPsec proposal for the policy (use the proposal
command in the IPsec policy apply context).
To enter the IPsec Manual Keys context, enter the following command from
the IPsec policy apply context:
Syntax: key-exchange-method manual
When you enter the context, the CLI will inform you of the proper number of
characters for the encryption and authentication keys based on the algorithms
in the proposal.