Manualshelf

TMS zl Management and Configuration Guide ST.1.1.100226

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
1341134213431344134513461347134813491350
A-151
Command-Line Reference
IPsec Policy Context
ProCurve(tms-module-<slot ID>:ipsec:bypass)# preview
IPsec policy
-------------------------------------------------------
*Policy Name: testpol
Status: Enabled
Action: Bypass
Direction: Both
Position: 1
Traffic Selector
*Protocol: TCP
*Local Address: 192.168.2.0/26
*Local Port: Any
*Remote Address: 2.2.2.0/24
*Remote Port: 443
IPsec Policy Deny Context
The IPsec policy deny context includes the commands specific to configuring
a deny IPsec policy. This type of policy selects traffic that is not secured by
an IPsec SA and is dropped instead. (This context is available only when the
TMS zl Module is in routing mode.)
Figure A-21. IPsec Policy Deny Context
To enter the IPsec policy deny context, enter the following:
Syntax: action deny