TMS zl Management and Configuration Guide ST.1.1.100226

A-167
Command-Line Reference
L2TP User Context
Copy DSCP value from clear packet: Disabled
DSCP Value: 0
DF Bit Handling: Copy DF bit from
clear packet.
ProCurve(tms-module-<slot ID>:ipsec:apply)# apply
ProCurve(tms-module-<slot ID>:ipsec:apply)# exit
ProCurve(tms-module-<slot ID>:ipsec)# exit
ProCurve(tms-module-<slot ID>:config)# l2tp local-user
l2tpuser
ProCurve(tms-module-<slot ID>:l2tp-user)# tunnel
10.100.1.1/24 user 10.100.1.80
ProCurve(tms-module-<slot ID>:l2tp-user)# auth group
l2tpusers protocol any
Password: ********
ProCurve(tms-module-<slot ID>:l2tp-user)# dns primary
10.1.2.100 secondary 10.1.2.80
ProCurve(tms-module-<slot ID>:l2tp-user)# preview
Preview L2TP Dial-in User
---------------------------------------------
User Authentication
User: l2tpuser
Password: ******
Policy Group Name: l2tpusers
Authentication Protocol: Any
Tunnel Configuration
Server IP Address/Mask: 10.100.1.1/24
User IP Address: 10.100.1.80
Primary DNS Server: 10.1.2.100
Secondary DNS Server: 10.1.2.80
Primary WINS Server: [not set]
Secondary WINS Server: [not set]
ProCurve(tms-module-<slot ID>:l2tp-user)# apply
ProCurve(tms-module-<slot ID>:l2tp-user)# exit
ProCurve(tms-module-<slot ID>:config)#