TMS zl Management and Configuration Guide ST.1.1.100226

A-173
Command-Line Reference
OSPF Context
OSPF Context
The OSPF context includes commands for configuring global OSPF settings.
It is available only when the TMS zl Module is in routing mode.
Figure A-24. OSPF Context
To enable OSPF and access the OSPF context, enter the following from the
global configuration context:
Syntax: router ospf
To verify your location in the CLI, check the prompt. In the OSPF context, the
prompt is ProCurve(tms-module-<slot ID>:ospf)#.
From the OSPF router context you can:
■ Configure areas
■ Configure graceful restart
■ Enable and disable RFC 1583 compatibility
■ Restrict addresses
To exit the OSPF context, enter the following command:
Syntax: exit