TMS zl Management and Configuration Guide ST.1.1.100226

A-182
Command-Line Reference
Product OS Show Commands
Product OS Show Commands
The Product OS show commands allow you to view information about, or the
current status of, an interface or feature. They help you to troubleshoot. The
show commands available in the Product OS are described in the sections
below.
Most show commands are available with either operator or manager access;
however manager access is required for a couple commands. (Note that with
manager access, you can enter the commands from any context, including any
configuration context.) In addition, fewer show commands are available when
the module operates in monitor mode. Table A-49 displays the complete list.
Table A-49. show commands
Command Manager Routing
Mode
Operator Routing
Mode
Manager Monitor
Mode
Operator Monitor
Mode
show aaa XXXX
show access-policy XX
show address XX
show address-group XX
show alg XX
show arp XXXX
show attack-setting XX
show banner XXXX
show connection-settings XX
show connections XXXX
show dhcp-relay XX
show gre XX
show high-availability XX
show ip XXXX
show ip-mtu XXXX
show ip-reassembly XX
show ips XXXX
show ipsec XX
show l2tp XX
show lldp XXXX