TMS zl Management and Configuration Guide ST.1.1.100226

A-184
Command-Line Reference
Product OS Show Commands
show access-policy
This command shows the firewall access policies currently configured on the
module. You can view policies by type of policy (multicast or unicast) or by
user group. Additionally, you can filter the results by source zone and desti-
nation zone.
To view all of the unicast firewall access policies, enter the following com-
mand:
Syntax: show access-policy [group <group name> | multicast] [filter <source zone>
<destination zone>]
To view firewall access policies, according to user group, enter the following
command:
Syntax: show access-policy group <group name>
Replace <group name> with the name of the user group.
Replace <source zone> and <destination zone> with the access policy’s source
zone and destination zones, respectively.
The available zones for filtering are:
■ any
■ self
■ internal
■ external
■ dmz
■ zone1
■ zone2
■ zone3
■ zone4
■ zone5
■ zone6
■ <user named zone>
show address
This command shows all or one of your address objects. The name, object
type, and IP address information are displayed.
To view your address object or objects, enter the following command:
Syntax: show address