TMS zl Management and Configuration Guide ST.1.1.100226

A-189
Command-Line Reference
Product OS Show Commands
Replace <VLAN ID> with the VLAN ID.
To view RIP peer information, enter the following command:
Syntax: show ip rip peer [IP address]
Replace <IP address> with the IP address of the peer router.
To view restricted addresses, enter the following command:
Syntax: show ip rip restrict
show ip ospf
The show ip ospf command shows information about OSPF on the network.
You can view:
■ General information
■ Areas
■ Area link-states
■ External link-states
■ OSPF on a particular interface
■ Neighbors
■ Data grace link-state information
■ Redistribution
■ Restrictions
To view general information about OSPF, enter the following command:
Syntax: show ip ospf general
To view information about OSPF areas, enter the following command:
Syntax: show ip ospf area
To view information about OSPF area link-states, enter the following
command:
Syntax: show ip ospf area-link-state
To view information about OSPF external link-states, enter the following
command:
Syntax: show ip ospf external-link-state [router-id <IP address>]
Replace <IP address> with the IP address of the router.