TMS zl Management and Configuration Guide ST.1.1.100226

A-191
Command-Line Reference
Product OS Show Commands
■ Group Address—Each multicast group for which the module knows a
route
■ Source Address—The IP address of the multicast source for that group
■ Neighbor—The IP address of the next router in the path to that source
■ VLAN—the VLANs out which the module forwards multicast traffic for
this group
show ip pim
To view PIM settings (such as the VLANs on which PIM is enabled and the
TMS zl Module’s DR priority), enter the following command:
Syntax: show ip pim
To view the list of RPs which the TMS zl Module has discovered, enter the
following command:
Syntax: show pim rp-set
show ip igmp
To view the status of IGMP as well as IGMP counters, enter the following
command:
Syntax: show ip igmp
To view IGMP settings (such as the VLANs on which IGMP is enabled), enter
the following command:
Syntax: show ip igmp config
show ip dns
To view the TMS zl Module’s domain and DNS server, enter the following
command:
Syntax: show ip dns
show ip-mtu
This command shows the module’s MTU.
Syntax: show ip-mtu