TMS zl Management and Configuration Guide ST.1.1.100226

A-194
Command-Line Reference
Product OS Show Commands
show l2tp
Use this command to view information about L2TP authentication.
To see whether authentication to an external RADIUS server is enabled and
to view the TMS zl Module’s virtual IP address as the L2TP server, enter the
following command:
Syntax: show l2tp radius-auth
To view the IP settings configured for users who authenticate to external
RADIUS servers, enter the following command:
Syntax: show l2tp radius-auth domain-config [domain name]
Optionally, replace [domain name] with the domain you want to view. In this
case, you will see detailed information about the IP settings for the domain.
If you do not specify a domain name, this command lists all domains with more
limited information about the IP settings.
To view your local L2TP users, enter the following:
Syntax: show l2tp user [username]
Optionally, replace [username] with the name of a specific user. In this case,
you will see detailed information about the user. If you do not specify a user
name, this command lists all local L2TP users with more limited information
about them.
show lldp
This command shows the LLDP configuration.
Syntax: show lldp
show logging
This command shows all of the logging information. You can view information
about:
■ Local logging (and reverse local logging)
■ Syslog forwarding
■ Email forwarding
■ SNMPv2 and SNMPv3 trap destinations
■ Logging thresholds