TMS zl Management and Configuration Guide ST.1.1.100226

A-199
Command-Line Reference
Product OS Show Commands
show vlans
This command shows information about the TMS VLANs. This command
shows the IP address of the VLAN and the zone to which it belongs.
Syntax: show vlans [unassociated]
The unassociated option shows VLANs that the module has detected on the
host switch but that have not been added to a zone.
show vlans mac-addresses
This command shows the MAC addresses that are associated with the TMS
VLANs.
Syntax: show vlans mac-addresses
After you enter this command, you will see information similar to the follow-
ing:
ID VLAN MAC Address
----- ------------------ ---------------
*10 MGMT 00:1f:fe:82:5c:9d
20 VLAN20 00:21:f7:b0:05:b6
30 VLAN30 00:21:f7:b0:05:b6
40 VLAN40 00:21:f7:b0:05:b6
*: Unique MAC address assigned.
show vpn
With the show vpn command you can view information about your VPNs,
such as:
■ the IKE SAs
■ VPN tunnels
■ RADIUS authenticated L2TP connections
Type the following command to view the current IKEv1 SAs:
Syntax: show vpn connections ike-sa [<policy name> <SA number>]