TMS zl Management and Configuration Guide ST.1.1.100226

2-21
Initial Setup in Routing Mode
Initial Setup
3. Install the product license key on the TMS zl Module.
See “Install the Product License Key” on page 2-24.
Obtain the Necessary IDs
Before you begin to register the TMS zl Module, you should obtain the two IDs
that you need to complete the process successfully:
■ Product registration ID
■ Activation hardware ID
Product Registration ID. When you purchased the TMS zl Module, an HP
ProCurve Threat Management Services zl Module Registration and Licens-
ing Card was included in the box. As shown in Figure 2-7, a product registra-
tion ID is printed on the front of this Registration and Licensing Card. You
will need this product registration ID when you register the TMS zl Module.
Figure 2-7. HP ProCurve Threat Management Services zl Module Registration
and Licensing Card
Make sure you
have the correct
Registration and
Licensing Card
Locate the
product
registration ID