TMS zl Management and Configuration Guide ST.1.1.100226

2-26
Initial Setup in Routing Mode
Initial Setup
To register the IDS/IPS signature subscription, complete the following tasks.
(Step-by-step instructions for each task are provided in the sections that
follow.)
1. Obtain the subscription registration ID and the TMS-subscription hard-
ware ID.
For step-by-step instructions, see “Obtain the Necessary IDs” on page 2-26.
2. Enter the subscription registration ID and the TMS-subscription hardware
ID on the My ProCurve portal.
For step-by-step instructions, see “Enter the IDs on the My ProCurve
Portal” on page 2-28.
Obtain the Necessary IDs
Before you begin to register an IDS/IPS signature subscription, you must
obtain the subscription registration ID and the TMS-subscription
hardware ID.
Subscription Registration ID. If you purchased an IDS/IPS signature sub-
scription, you received an HP ProCurve Threat Management Services x-Year
IDS/IPS Subscription Registration Card. As shown in Figure 2-10, a subscrip-
tion registration ID is printed on the front of this Registration Card. You will
need this subscription registration ID when you register the IDS/IPS signature
subscription.