TMS zl Management and Configuration Guide ST.1.1.100226

2-61
Initial Setup in Routing Mode
Configure Management Access
2. From the User list, select manager (read/write) or operator (read only).
3. For Old password, type the current password.
Note The default passwords are: manager = procurve; operator = operator.
4. For New password and Confirm new password, type a new password for the
user. The new password cannot have more than 14 characters.
5. Click Apply My Changes.
Note The operator cannot change passwords. Operator is read-only in all windows.
6. Click Save.
Configure RADIUS Authentication for Management
Users (Optional)
You can use an external RADIUS server to authenticate users who attempt to
access the TMS zl Module's Web browser interface or the CLI using SSH. This
feature allows you to create multiple users with manager rights and multiple
users with operator rights. It also enables you to track management sessions.
Follow these steps:
1. Click Network > Authentication and click the Management Users tab.
2. Select the Enable RADIUS for management user authentication check box.
The setting is applied as soon as you select the check box.
Figure 2-30. Network > Authentication > Management Users Window