Manualshelf

TMS zl Management and Configuration Guide ST.1.1.100226

ManualsBrandsHP ManualsComputer AccessoriesHP ProCurve Switch xl Access Controller Module
181182183184185186187188189190
2-66
Initial Setup in Routing Mode
Configure Management Access
3. Verify that for Cluster Scheme, None is selected.
Figure 2-33. System > Settings > High Availability Window
4. Under HA IP Configuration, configure the following:
a. For VLAN ID, type the VLAN number of the unused VLAN that is not
used. This VLAN must be configured on the host switch.
b. For IP Address and Subnet Mask, type an IP address and subnet mask
on that VLAN.
5. Click Apply My Changes.
6. Click Save.