TMS zl Management and Configuration Guide ST.1.1.100226

2-81
Initial Setup in Routing Mode
Configure Management Access
Configure Zones
The TMS zl Module has 10 zones. (For information on zones, see “Plan the
Zones” on page 2-8.) If you want, you can rename 8 of these zones according
to your needs. See “Rename a Zone” on page 2-81.
If you want the TMS zl Module to use a zone, you need to associate at least
one VLAN with it. This VLAN then becomes a TMS VLAN. You can create up
to 256 TMS VLANs. Each TMS VLAN is in one and only one zone. See
“Associate a VLAN with a Zone” on page 2-82.
Rename a Zone
It is often a good idea to rename a zone according to its purpose on your
network. For example, if you plan to place all of your employee VLANs in a
single zone, you can name that zone Employees. You can rename all zones on
the TMS zl Module except the Self zone and the External zone.
To rename a zone, follow these steps:
1. Click Network > Zones. Then click Names.
2. Replace the existing zone name by typing the zone’s new name in the field.
For example, to rename ZONE1 as Employees, type Employees in the field
that contains ZONE1.