TMS zl Management and Configuration Guide ST.1.1.100226

3-17
Initial Setup in Monitor Mode
Initial Setup
2. From the host switch’s manager-level context, enter the TMS zl Module’s
Services OS context:
You are now in the Services OS context, and you should see a prompt that
is similar to the following:
hostswitch(services-module-C:HD)#
3. Display the TMS-subscription hardware ID by entering the following
command in the TMS zl Module’s Service OS CLI.
4. Record the TMS-subscription hardware ID. (You may want to copy this
hardware ID to a text file.) You will use the TMS-subscription hardware
ID as you complete the registration process for the IDS/IPS signature
subscription.
Syntax: services <slot ID> 1
Moves you to the Services OS context.
Replace <slot ID> with the letter of the chassis slot in which
the module is installed.
Syntax: licenses hardware-id tms-subscription
Displays the hardware ID for the IDS/IPS signature sub-
scription.