TMS zl Management and Configuration Guide ST.1.1.100226

3-20
Initial Setup in Monitor Mode
Initial Setup
setup, installing the license is sufficient. You will learn how to download
signatures in “Download Signatures” in Chapter 6: “Intrusion Detection and
Prevention.”
Boot the TMS zl Module to the Product OS
You are now ready to boot the TMS zl Module to the Product OS. Complete
the following steps:
1. From the Services OS context, enter:
2. When asked if you would like to reboot the module, type y.
hostswitch(services-module-C:HD)# boot product
Changing boot from Service OS to Product OS.
System will be rebooted. Do you want to continue
[y/n]? y
Rebooting
3. You will be returned to the host switch’s CLI. If you want to view the
progress of the reboot process, enter the following commands in succes-
sion:
For example, if the TMS zl Module is in slot C, you would enter:
hostswitch# show services c
hostswitch# repeat
Syntax: boot product
Boots the Product OS.
Syntax: show services <slot ID>
Displays the current status of the module and the version
of the operating systems running on the module.
Replace <slot ID> with the letter of the slot where the.
Syntax: repeat
Repeatedly executes the previous command you entered