TMS zl Management and Configuration Guide ST.1.1.100226

3-21
Initial Setup in Monitor Mode
Initial Setup
You will continue to see updated output for the show services command.
The following shows an example of the output you might see. The Current
status information will vary, depending on the progress of the boot pro-
cess.
Status and Counters - Services Module C Status
HP Services zl Module J9154A
Versions : A.01.06
Current status : booting
For more information, use the show commands in
services context
When the Current status is “running” as shown below, press any key to stop
the execution of the show services command.
Status and Counters - Services Module C Status
HP Services zl Module J9154A
Versions : A.01.06, B.01.03
Current status : running
For more information, use the show commands in
services context
You can now enter the Product OS context.
Access the TMS zl Module Product OS Context
The Product OS context is used to configure the IDS and other features
provided by the TMS zl Module. There are two command options for entering
this context.
The advantage of the first option is that it requires fewer keystrokes. The
second option, on the other hand, does not require you to know the index
number for TMS zl Modules on your host switch. However, you should have
already obtained this information with the show services command.