TMS zl Management and Configuration Guide ST.1.1.100226

3-22
Initial Setup in Monitor Mode
Initial Setup
Option 1. You can access the Product OS by typing the index number asso-
ciated with the TMS zl Module. Use the following command, entered from
either the switch’s manager-level or global configuration context.:
For example, when you entered the show services command, you saw this
output:
Table 3-5. CLI Display of Services Example
You noted that the slots for your TMS zl Modules are C and E and that their
index number is 2. You want to access the Product OS for the first TMS zl
Module, so you enter this command:
hostswitch# services c 2
If, instead, you saw the output shown in Table 3-6, you would enter this
command to access the Product OS for the TMS zl Module in slot C:
hostswitch# services c 3
Table 3-6. CLI Display of Services Example 2
Syntax: services <slot ID> <product index>
Moves you to an OS context on the module.
Replace <slot ID> with the letter for the chassis slot in which
the module is installed.
Replace <product index> with the index number that your
particular switch has assigned the TMS zl Module.
Slot Index Description Name
C, D, E 1. Services zl Module services-module
C, E 2. Threat Management Services zl Module tms-module
D 3. Data Center Connection Manager dcm
Slot Index Description Name
C,D, E 1. Services zl Module services-module
D 2. Data Center Connection Manager dcm
C,E 3. Threat Management Services zl Module tms-module