TMS zl Management and Configuration Guide ST.1.1.100226

3-36
Initial Setup in Monitor Mode
Configure Management Access
Configure the Module’s Management Settings
To access the Web browser interface, you configured a set of management
settings. You assigned a management VLAN and IP address, as well as a default
gateway. But you can change these settings in the Web browser interface.
To view or change the module’s management settings, complete the following
steps.
1. Select System > Settings and click the General tab.
Figure 3-17. System > Settings > General Window
2. Under Management IP Configuration, configure the following:
a. For VLAN ID, type the management VLAN ID.
b. For IP Address and Subnet Mask, type the management IP address and
subnet mask.
3. Click Apply My Changes.
4. Click Save.