TMS zl Management and Configuration Guide ST.1.1.100226

3-43
Initial Setup in Monitor Mode
Configure Management Access
2. Under RADIUS Settings, for Authentication Protocol, select the protocol that
the TMS zl Module uses to communicate with all of your RADIUS servers.
Options include:
• MS-CHAPv1
• CHAP
•PAP
3. Click Add RADIUS Server. The Add RADIUS server window is displayed.
Figure 3-24. Add RADIUS server Window
4. In the Server Address field, type the IP address or FQDN of your RADIUS
server. The port is always 1812.
5. In the Secret and Confirm Secret fields, type the shared secret for your
RADIUS server.
6. In the NAS Identifier field, type the NAS ID associated with the module.
The default NAS Identifier is the module’s hostname.
Note The NAS-Identifier is only sent for CHAP and MS-CHAP authentication
requests (not for PAP requests).
7. Optionally, for Domain Name, type the domain name associated with your
RADIUS server.