TMS zl Management and Configuration Guide ST.1.1.100226

3-47
Initial Setup in Monitor Mode
Configure Management Access
Figure 3-26. System > Logging > View Log Window
In this window, you can see a real-time list of events for the TMS zl Module’s
operation. The events that are displayed are those at or above the severity
selected in the System > Logging > Settings window (the default is Critical).
To filter the logs that are displayed in this window, select and clear the
appropriate check boxes under Filter. To add or remove columns from the
display, select or clear options listed under Table Columns.
For example, to see logs of minor severity, complete the following steps.
1. Under Filter, select the Severity check box.
2. Select is for the type of filter.
3. Select Minor for the filter severity.
4. Click Apply filter. Only events with minor severity art displayed on the
window.
5. Under Tab le Columns, select or clear options that you want to include
in the logging display.