TMS zl Management and Configuration Guide ST.1.1.100226

3-49
Initial Setup in Monitor Mode
Configure Management Access
To configure log settings, follow these steps:
1. Select System > Logging and click the Settings tab.
Figure 3-27. System > Logging > Log Settings Window
2. From the list, select the lowest severity level of the events that you want
the module to log.
3. Configure the throttling setting:
• To suppress duplicate event logs, select the Enable Throttling check
box.
• To have the TMS zl Module log all events, including identical ones,
clear the Enable Throttling check box.
4. If you have enabled throttling, in the space provided, type the number of
duplicate messages that you want to occur before a tally message is
forwarded.
Figure 3-28. Duplicate Message Text Box
5. In the space provided, type the number of seconds that you want to pass
before a tally message is forwarded.
Figure 3-29. Time Limit Text Box
6. Click Apply My Changes.