TMS zl Management and Configuration Guide ST.1.1.100226

3-56
Initial Setup in Monitor Mode
Configure Management Access
■ Private
• Role = Manager
• Write Access = Unrestricted
You change the names, roles, and write access of the default communities, or
you can add new communities. Editing and adding a community are much the
same process. Follow these steps:
1. Complete one of these two steps:
• To edit one of the default communities, click the Edit icon in the Tools
column for the community that you want to edit.
Figure 3-37. Edit SNMPv1/v2 Community Window
• To add a community, click Add another community.
Figure 3-38. Add SNMPv1/v2 Community Window
2. For Community Name, type the community name for the SNMP server.
3. From the Role list, select Manager (read-write) or Operator (read only).
Select the role that corresponds with the community name you typed in
step 2.
4. From the Write Access list, select Unrestricted (read-write) or Restricted
(read only). Select the access that corresponds with the community name
and role that you specified in steps 2 and 3.