TMS zl Management and Configuration Guide ST.1.1.100226

3-66
Initial Setup in Monitor Mode
System Maintenance
7. Uninstall the current product software:
For example:
hostswitch(services-module-C:HD)# uninstall product
8. Reinstall the product software:
For example, if the image directory is named ST.3.2.090311, you would
type:
hostswitch(services-module-C:HD)# install product
ST.3.2.090311
You can type the first few letters of the image directory name, then press
[Tab] to complete the name. You might need to type the last few characters
to complete the name.
9. When the installation has finished, boot the Product OS:
For example:
hostswitch# boot product
System will be rebooted. Do you want to continue
[y/n]? y
Rebooting
The module is now restored to the factory default settings.
Syntax: uninstall product
Uninstalls the current TMS zl Module software.
Press
[Enter] or [y] for any prompts that are displayed.
Syntax: install product <directory>
Installs the latest software version on the TMS zl Module.
Replace <directory> with the name of the directory that
contains the new software image.
Press
[Enter] for any prompts that are displayed.
Syntax: boot product
Boots the Product OS.