TMS zl Management and Configuration Guide ST.1.1.100226

4-10

Firewall

Named Objects

Table 4-1. Named Objects and Their Uses

Address Objects

Address objects can be configured in three windows of the TMS zl Module’s

Web browser interface:

■ Firewall > Access Policies > Addresses

■ Firewall > NAT Policies > Addresses

■ Firewall > Port Triggers > Addresses

Any object that is created in one window will be displayed in the other two

windows. For example, an address object that is created in the Firewall >

Access Policies > Addresses window will appear on the addresses list in the

Firewall > NAT Policies > Addresses and Firewall > Port Triggers > Addresses

windows.

You can create up to 500 address objects.

You can create four types of address objects:

■ IP—Contains individual IP addresses for one or more network devices

with noncontiguous IP addresses

■ Range—Contains one or more ranges of contiguous IP addresses

■ Network—Contains network addresses for one or more networks or

VLANs. You can also specify a VPN connection with a network address.

Object Type Firewall NAT Port Trigger IPsec

Single-entry IP XXXX

Multiple-entry IP X

Single-entry Range X X X

Multiple-entry Range X

Single-entry Network X X X

Multiple-entry Network X

Multiple-entry Domain

name

Single-port service X X X

Port-range service X X

IANA IP protocol X X

Address groups X

Service groups X X

Schedule X