TMS zl Management and Configuration Guide ST.1.1.100226

4-18
Firewall
Named Objects
Figure 4-6. Firewall > Access Policies > Services Window (Partial)
2. Click Add Service.
Figure 4-7. Add Service Window
3. In the Name field, type the name of the service.
Note When specifying a Name, you can use alphanumeric characters and the
following special characters: exclamation point (!), asperand (@), hash sign
(#), dollar sign ($), asterisk (*), hyphen (-), and underscore (_)
4. From the Protocol list, select a protocol.
5. If you selected TCP or UDP in step 4, in the Port(s) fields, type the port
number range. If there is only one port number, type it in the first field.
When creating a service object for a well-known service on an alternative
port, you may also need to configure a port-to-service association. (See
“Port Mapping” on page 4-84.)
6. Click Apply.