TMS zl Management and Configuration Guide ST.1.1.100226

4-29
Firewall
Firewall Access Policies
Create Firewall Access Policies
To configure a firewall policy, complete the following steps:
1. Create a unicast access policy or a multicast access policy:
• To add a unicast access policy, click Firewall > Access Policies >
Unicast.
• To add a multicast access policy, click Firewall > Access Policies >
Multicast.
2. From the User Group list, select the user group to which you want to apply
the policy.
3. Click Add a Policy. The Add Policy window is displayed at the Basic tab.
Figure 4-13. Add Policy Window > Basic Tab
4. From the Action list, select Permit Traffic or Deny Traffic.
5. From the From list, select the source zone.
6. From the To list, select the destination zone.