TMS zl Management and Configuration Guide ST.1.1.100226

4-82
Firewall
User Authentication
30. Click Add RADIUS Server. The Add RADIUS Server window is displayed.
Figure 4-60. Add RADIUS server Window
31. For Server Address, type the address of your NPS.
32. For Secret and Confirm Secret, type the shared secret for your RADIUS
server. Be sure to set the same secret here that you did in step 7.
33. For NAS Identifier, accept the default, which is the NAS ID of your module,
or if you specified another ID in step 5, type that ID.
34. For Domain Name, type the domain to which your server belongs.
35. Click OK.
36. Now add the user group to which the RADIUS server assign these users.
Click the User Group tab.
37. Click Add user group.