TMS zl Management and Configuration Guide ST.1.1.100226

4-83
Firewall
User Authentication
Figure 4-61. Add user group Window
38. For Group Name, type the same string that is configured in the Filter-ID
attribute in step 31.
39. Click OK.
40. Click Save.
The module can now authenticate the users you specified in step 16 to the
network when the users browse to the TMS zl Module’s login page (the
module’s IP address) and type <username>@<domain name> and their password
on the login window. (The users must browse to the TMS zl Module’s login
page to authenticate; they will not be automatically redirected.)
To set up firewall access policies for these users, select the group that you
configured for them from the User Group list in the Firewall > Access Policies
> Unicast window.