TMS zl Management and Configuration Guide ST.1.1.100226

4-114
Firewall
Connection Timeouts
4. After you have updated all the timeouts, click Apply my changes.
5. Click Save.
Configure Timeout Settings for Services
To configure a custom timeout, complete the following steps:
1. Click Add Custom Timeout. The Add Custom Timeout window is displayed.
Figure 4-75. Add Custom Timeout
2. Type the name of the service in the Name field.
3. Choose either TCP or UDP from the Protocol list. Be sure to select a
protocol that is compatible with the service you typed in step 2.
4. For Port, type a port number or port range for the service.
5. Type the maximum time in seconds that an inactive session should remain
open in the Timeout field. If you attempt to set a time outside of the default
limits, an error message will be displayed.
6. Click OK.