TMS zl Management and Configuration Guide ST.1.1.100226

4-127
Firewall
IP Reassembly
Figure 4-90. Packet Reassembly
Configure MTU
The default setting for the MTU is 1500, but the TMS zl Module allows you to
adjust this setting to between 1500 and 9220. The MTU is global and applies
to all TMS VLANs.
To adjust the MTU, complete the following steps:
1. Click Network > Settings > General.
Figure 4-91. Network > Settings > General Window
2. Under General Settings, for MTU, type the desired MTU value.