TMS zl Management and Configuration Guide ST.1.1.100226

4-128
Firewall
IP Reassembly
3. Click Apply My Changes.
4. Click Save.
Configure IP Reassembly
The default settings for IP reassembly are in Table 4-14. Consult the product
literature for your routing devices to see the optimum settings for your
network.
Table 4-14. IP Reassembly Default Settings
To configure the IP reassembly settings, click Firewall > Settings and click the
IP Reassembly tab.
Figure 4-92. Firewall > Settings > IP Reassembly Window
To disable IP reassembly, clear the Enable IP reassembly check box. To adjust
reassembly parameters, type the preferred parameters in each field.
Guidelines:
■ If the Maximum Packets Allowed, Maximum Packet Size, Maximum Fragments
per Packet, or Maximum Fragment Size limits are set too low or too high,
memory will be depleted too quickly and performance will suffer.
Definition Setting
Maximum packets allowed 2000
Maximum packet size 65535
Maximum fragments per packet 47
Maximum fragment size 28
Maximum time to receive all fragments 60