TMS zl Management and Configuration Guide ST.1.1.100226

5-27
Network Address Translation
NAT Examples
i. Select Use IP of routed VLAN interface.
The module will translate all source Address(es) to its own IP address
on the VLAN interface to which the NATed traffic is routed—in this
example, 10.1.1.1.
.
Figure 5-12. Add NAT Policy Window—Module 1
j. Click OK.
2. Create a firewall access policy to permit the traffic from Zone5 to the data
center.
a. Click Firewall > Access Policies > Unicast.
b. Click Add a Policy.
c. For Action, select Permit Traffic.
d. For From, select ZONE5.
e. For To, select ZONE3.
f. For Service, accept the default, Any Service.
You can, alternatively, configure the firewall policy to allow only
certain services.