TMS zl Management and Configuration Guide ST.1.1.100226

5-31
Network Address Translation
NAT Examples
j. Select the Enable IPS for this Policy check box if you want to enable
IPS to check packets on this policy.
k. Optionally, select the Enable logging on this Policy check box to log
access policy activities.
Note It is not recommended that you enable logging permanently because
policy logging is processor intensive. Use policy logging for trouble-
shooting and testing only.
l. In the Insert Position (Optional) field, specify the priority of this access
policy so that it will be processed correctly.
Figure 5-15. Add Policy Window—Module 2
m. Click Apply.
3. Click Save.
Single NAT Address
In this example, you want to mask the addresses in the Internal zone when
those devices access the DMZ. The servers in the DMZ will see all traffic from
the Internal zone as originating from a single address, 10.1.2.107. This address